Mobirise

371044
Asador Top a gas, con Piedra Volcánica, 7 Kw

371044 (E7GRGDLC00)

Half module gas lava stone grill top


  • To be installed on open base installations, bridging supports or cantilever systems. Suitable for natural gas or LPG. 7 kW stainless steel gas burners with flame failure device. Gas burners protected by stainless steel deflection trays preventing blockage from foreign objects. Cooking surface grids in enameled cast iron, easily removable for cleaning. Exterior panels in stainless steel with Scotch Brite finish. One piece pressed work top in 1.5 mm thick stainless steel. Right-angled side edges to allow flush-fitting junction between units.

  • Unit to be mounted on open base cupboards , bridging supports or cantilever systems.
  • Heating via Stainless steel gas burners with flame failure device.
  • Burners protected by stainless steel deflection trays to prevent blockage.
  • Piezo ignition.
  • Cast iron grids can be adjusted on two levels.
  • Stainless steel high splash guards on the rear and sides of cooking surface. Splash guard s can be easily removed for cleaning and are dishwasher-safe.
  • Scraper for cleaning of grilling grids included.
  • Top configuration allows installation on ambient base only (not possible to install on refrigerated nor freezer base).
  • Cooking grids made in highly resistant enameled cast iron for easy cleaning.

  • All exterior panels in Stainless Steel with Scotch Brite finishing.
  • One piece pressed 1.5 mm work top in Stainless steel.
  • Model has right-angled side edges to allow flush fitting joints between units, eliminating gaps and possible dirt traps.
  • IPx4 water protection.
Gas
Gas Power: 371044 (E7GRGDLC00) 7 kW
Standard gas delivery: Natural Gas G20 (20mbar)
Gas Type Option: LPG;Natural Gas;Town
Gas Inlet: 1/2"
Info
Cooking surface width: 321 mm
Cooking surface depth: 478 mm
Net weight: 32 kg
Shipping weight: 46 kg
Shipping height: 530 mm
Shipping width: 460 mm
Shipping depth: 820 mm
Shipping volume: 0.2 m³
If appliance is set up or next to or against temperature sensitive furniture or similar, a safety gap of approximately 150 mm should be maintained or some form of heat insulation fitted.
Certification group: N7GG

Ficha técnica

CAD